![Fred Sena](/img/default-banner.jpg)
- 144
- 1 648 607
Fred Sena
Приєднався 8 кві 2006
Відео
Legion 5 Ryzen 7 / GTX 2060 - Display weird problem. Lines
Переглядів 7203 роки тому
Config: AMD Ryzen 7 4800H 2.90 GHz nVidia GeForce RTX 2060 6 GB 16 GB DDR4 SSD 512 GB 15.6" IPS 1920x1080 FHD / 144 Hz 300 nit Description: Out of the box and fresh Windows installation. I noticed some weird artifacts going on the screen. Few minutes later I notice it was in some part of videos, photos, browsing. In short: a certain displayed image triggers this problem. I tried : - Updated ALL...
Flying Phone with Drone
Переглядів 713 роки тому
I decided out of boredom, to take my Samsung Galaxy S9 for a spin. At first, result was awful due to high frequency vibration from drone. Next I built a Vibration Dumper and it helped. Everything can always get better, but for this weekend project, I'm happy with it. (I will soon upload 3D files of camera and dumper) Frame iflight XL5 FC GEPRC F722 Motor XING 2306 1700KV Dalprop 5043 pro 6S - T...
FPV In the Flow
Переглядів 363 роки тому
Flight took place somewhere where FPV is ok No country for old drone 6S 5" Gopro 5
Rubik Cube - 180 Inverted Yaw Spin | FPV
Переглядів 374 роки тому
Rubik Cube - 180 Inverted Yaw Spin | FPV
Big hill somewhere - little range | FPV
Переглядів 114 роки тому
Big hill somewhere - little range | FPV
This is incredible!!! I love it!! Thank you for sharing with us...
Hello, great job. Would you share the scene or printscreens how did you setup it? Thank you :)
Legau cacaca rarara otimu corta coloca protutu pra demte bramco
Same problem. But i live in a country where they dont replacr stuff
Im watching this from my Legion 5 that got the same line problem lol
The store gave me another one. It was all good. Untill now, 10 months later, I have now a leaking pixels (when display colors, it looks like dotted display. Many other Legion 5 display start to surface... Machine is great. Display though.. such a shame.
Needed that 🤟Thanks!! #1 place to + your subs P-R-O-M-O-S-M!
Barulhinho gostoso hahaha Tu montou esse drone ou comprou pré-montado?
Esse FPV eu montei. desmontei, montei..quebrou, reparei, montei outro... rsrs
Бомба, музыки не хватает ))
Very nice!!
One-off defect, definitely just needs RMA
Yes, I got very lucky. My chance of find a gold coin was totally wasted. Urgh! - The store gave me new one and now I'm 1000% enjoying this machine.
@@FredSena Glad to hear it worked out in the end!! Do you still have this laptop? Are you still enjoying it?
get a refund and get it replaced
Yes, in few hours Im going to return it. Just a very unique flaw that I failed to find similar one in this model or any other monitor ever.
Posted also on Lenovo channel of Reddit: www.reddit.com/r/Lenovo/comments/m505w7/legion_5_display_weird_problem/
Here the Reddit post about it: www.reddit.com/r/LenovoLegion/comments/m4z2e5/legion_5_ryzen_7_gtx_2060_display_weird_problem/
Looks like that Reddit post you reference has been removed.
What is the bearing size?
I have same problem anyone know solution ?
Two things to have it fixed: add some vibration dumper in the structure (concrete/plaster), lay the machine in a solid base (not a glass top table like me - I did just to enhance the issue), add a rubber pad. Second it is about electronic: microstep is your friend to have smooth machine. It is not about resolution, but vibration. Trinamic boards nowadays is awesome. I wish it was a affordable thing back in 2012 (year of this video)
@@FredSena Thank you for your reply, i tried microstepping it helps to reduce vibration i will add dumper.
Your screw is CROOKED
Was. 2012 :)
ANOTHER !! ZOOMMBBEE !! CLOWN !! CLONE !!! PLAYING !! AROUND !!! WITH !! HIS !!! USELESS !!! TOY !!! LATHE !!!
Love the 4 "jaw" chuck. xD
Where did you get that chuck?
The title of video is your answer. google it :)
Lihe hack: Good practice to read previous comments and description.
@@FredSena no I mean that jaws that your lathe uses, I just bought a taig lathe as well from a second hand shop but the Chuck isn't reversible like yours
@@FredSena I was not talking about the lathe,I was talking about the Chuck
@@FredSena why no reply lol
What.. wait wait... Is this diy lathe made of cnc 4th axis motor? I belive its an servo motor ? Im searching on google and youtube all day to find something to prove if its possible or not and today i find it acidentaly, im so happy 😄 I have an idea to make some small lathe to turn rings from wood and steel, and other hard materials something like some watchmaker lathe machine .. Thats awesome 😁 Thx for video 👍🏻
This is a lovely TAIG Lathe (taigtools . com) The motor is behind the white plastic " wall" sheet. A big motor :) I wish the motor would be just the small black box.
😅 i notice it later haha...
hi. I've got iron(III)oxide nanoparticles from sigma-aldrich. how do you make a stable water/alcohol suspension like this one in the clip? and why do you keep them in a cryotube??
Here is also mostly FE III, but did myself, therefore the distribution of size isn't constant. The media is water. The cryotube is what I had in hand
How prepared this procedure plz
nice
Thanks )
Usando rolamento axial entre os 608zz e o perfil?
Isso
parece um solução muito bora pra cargas mais pesadas.
Офигенно!!!
nice
Enough with the lissajous already :))) Such a great project thumbs up for sharing
Well...that was fast
hehhe work effective )
Cazzo figata voglio farlo anche io così
friend, where can i get the lathe you use?
taigtools . com
what material is that engraving. that's either verry weak material. or that laser is not at 80mw output. (120mA then 80mW sounds right)
It was a CD cover plastic. Laser still very weak and material cheap china plastic BLACK. so... besides this demo, it can't do much.
dude. why the z-hop. it's a laser it just shuts off and on. please for the love of god get rid of the z movement with every travel
Dude, It was in 2008 ! I can't go back in time. chill :) besides I didn't want work all way to just use laser. It was a quick & dirt test.
ok. now i thought these ir lasers had such a low output that they were useless but i guess i was wrong.
Amigo mim add ai no teu WhatsApp 81 999999487
I want to build a mini lathe, There are many companies mini lathes in India with 40000 to 50000 Rs cost... But I can't want to afford it and my need is basic and as experiment Can you guide me in to make laths in cheap way ?
This what I've done is more a sculpture/toy than a functional lathe. Cheap things cost a lot! I advice to save some money and make/buy a good one, it shall last longer and even possible to sell later if you will. If you plan just have fun, do like I did here... random parts together and make some plastic dusts :)
@@FredSena thanks for reply friend I m brass jewellery manufacturer and in India mini lath cost 40 to 50 thousands or more But there after a buy lath i need to make some nessesory parts for use that cost 4 to 5 thousand If I make bench ,with Chuck,middle slide and last slide it cost me maximum 5 to 7 k only. Here separate parts of lath are available Anyway thanks for your reply 👍
In the video you clearly have the transmitter plugged into the input and the camera plugged into the output. You need to reverse this to get OSD to work
Yesn't. Wiring is correct. But that wasn't the main problem. These fake Omnibus never worked as supposed. I had 4 of them. All with random defects.
I’m more interested to know what microscope did you use. So cool. No need to change the optics
It was made with Microscope Nikon SMZ18. I adapted a camera Nikon 5100 to make the video here.
Cool! Nice vid btw. Thanks
First
Happen to have improved a lot at this? If i get any time I'm gonna continue trying to develop this game too.
Right after watch your video, I made this as a proof of concept for TinyWhoops. So far I didn't do anything else, but winter with it's darkness are coming to Moscow soon. And then I will work on this game more. I'd like to see a compilation of who made this too =)
Hott, theres a guy whose picture perfect handsomely shaped straight bridged nose/nostrils id love to make a life sized toy out of. Help!
Sick😂 are you exaggerating tho?😂
exaggerating? Not at all :) It was almost all fail over 4 days or riding. That was a master school for me. This year none of these happened. Now I laugh hard watching it. It is all pure joy =D
Did you ever get the OSD to work? Im haveing an issue with my F4 omnibus FC not showing my OSD also
Eventually yes, I did. I wrote new OSD fonts and it made the trick - BUT, I bought 4 Omnibus from BG - all pure trash. OSD, white smoke out of nothing, just avoid BG Omnibus. They are all bad fake copies. I moved to BG Matek and they are original and working fine for months now.
775-80w 🤔🤔🤔🤔😥
775
Hola, ese motor de donde lo saco? de que es,
Pasame el plano del torno
Upload font to fix it. I had that same issue and did the upload font in the OSD tab.
Yes, after this video i manage to fix it. But sadly all clone Omnibus from Banggood are faulty. they burn before any fun. Matek are original (so far) and holding well.
Now that's what i call having fun..!!! :-)
))) Great, simple idea, Thank you.
Olá, você pode me enviar o esquemático e a programação? Laurinha.nunes99@hotmail.com Obrigada desde já.
I have the same issue on my Sunny Sky motors that came stock with the GT200, added a cap, new vTX, messed with D term, nothing, every motor I have tested has a similar issue, some more than others, any suggestions or just get new motors? They are supposed to be "superior" lol